A failing submersible well pump can disrupt water supply, leading to costly repairs and downtime. Ignoring the issue may result in water shortages or pump failure, causing inconvenience. The solution? Remove and replace the pump efficiently to restore normal operation.
To remove a submersible well pump, disconnect the power, detach the well cap, pull the pump using lifting equipment, and check for damage. Proper handling prevents costly repairs and ensures smooth installation of a new deep well pump.
Understanding the process can save time and money. Let’s break down the costs, time, and difficulty level.
How Much Does It Cost to Pull a Submersible Well Pump?
The cost to remove a submersible well pump depends on factors such as well depth, labor rates, and equipment needed. On average, professional removal costs range from $500 to $2,000. Deeper wells (over 100 feet) or pumps requiring specialized tools can push the price higher.
DIY removal is cheaper but requires proper tools like pipe wrenches, lifting devices, and safety gear. If you lack experience, hiring a professional can prevent expensive mistakes, such as dropping the pump or damaging well components. To keep expenses low, compare quotes from different submersible well pump suppliers before deciding.
How Do I Know If My Submersible Well Pump Is Bad?
A failing deep well pump shows several warning signs, including:
- Low water pressure– Inconsistent or weak water flow may indicate pump failure.
- Air sputtering from faucets– A sign of a leaking pipe or pump malfunction.
- Unusual noises– Humming or clicking sounds may mean the motor is struggling.
- High electricity bills– A malfunctioning pump may consume more power than usual.
- No water supply– If no water comes out, the pump could be completely failed or the well could be dry.
Before removing the pump, test electrical connections and pressure switches to rule out minor issues. If problems persist, a submersible well pump supplier can help assess whether a replacement is necessary.
How Long Does It Take to Change a Submersible Well Pump?
Replacing a submersible well pump typically takes 4 to 8 hours, depending on factors like well depth, equipment used, and worker experience.
- Preparation (1-2 hours):This includes turning off the power, gathering tools, and setting up lifting equipment.
- Pump Removal (1-3 hours):Carefully pulling out the pump, checking the pipes and wiring for damage.
- Installation & Testing (2-3 hours):Lowering the new pump, securing electrical connections, and testing water flow.
Delays may occur if components like pipes or wiring need repairs. Hiring an experienced technician can speed up the process and minimize risks.
Can I Replace My Own Submersible Well Pump?
Yes, but it requires technical skills and proper tools. DIY replacement is possible for shallower wells (under 100 feet), but deeper wells demand professional expertise.
Steps for DIY replacement:
- Turn off power– Prevent electrical hazards.
- Remove the well cap– Access the pump components.
- Pull the pump– Use a hoist or tripod to lift the pump slowly.
- Inspect pipes and wiring– Check for wear or damage.
- Install the new pump– Carefully lower it back into the well.
- Reconnect and test– Restore power and check water flow.
Without the right equipment, DIY removal can result in pump damage or injury. If unsure, consulting a submersible well pump supplier can help find a cost-effective solution.
Removing a submersible well pump requires planning, safety precautions, and sometimes professional assistance to ensure a successful replacement.
